In what coordinate system can the Advance Design results be expressed?

 
  • Information
  • Software
    Advance Design
  • Module
    Advance Design - Basic module
  • Version
    *
  • Type
    Results Post-Processing
  • Difficulty
    *

In Advance Design, the results are expressed in the local coordinate system of the concerned element. Only the actions on supports are expressed in the global coordinate system.

Thus, the results on a linear element are given by default in the local coordinate system of the element, so that Fx is always a normal force (for example FX > 0 indicates that the element is tensed).

In what coordinate system can the Advance Design results be expressed

Similarly, the results on a planar element are given by default in the local coordinate system of the element. Thus Fyy is a normal force in the local Y direction, and in a plane perpendicular to the Y (local) axis.

In what coordinate system can the Advance Design results be expressed

The only exceptions are the section cuts on the planar elements. In this case, the results are expressed in the local coordinate system of the planar element on which they are defined.

However, in Advance Design this setting can be modified using the Options tab of the Results dialog box (Alt + Z).

In what coordinate system can the Advance Design results be expressed

In what coordinate system can the Advance Design results be expressed

Thus, for a plate with 2 supports on which a uniform load is applied like the one above, the results for Mxx may be:

In what coordinate system can the Advance Design results be expressed

GRAITEC GROUP 2017 At GRAITEC we take privacy seriously. Please read our privacy policy.